 |
 |
 |
 |
|
 |
|
Dremel 112 3/64 in. Engraving Cutter Features
Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Quality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals.
Dremel 112 3/64 in. Engraving Cutter Specification
Bit Diameter: 3/64"
Bit Diameter: 1,2 mm
Color Code: Teal
Description: High Speed Cutter
Shank Diameter: 1/8", 3,4 mm
Dremel 112 3/64 in. Engraving Cutter Includes
(1) Dremel 3/64" Engraving Cutter
Dremel 112 3/64 in. Engraving Cutter User Tips
For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Secure objects to a stable surface while working.
Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
If chattering occurs, increase speed.
|
|
|
|
|
|
|
