Features
Festool 564247 lithium ion T12 + 3 Cordless Drill Set Difference
Festool's cordless drills look different, because they are different. Crafted to the highest level of German engineering, Festool cordless drills offer a level of quality not found in other cordless drills. From the EC-TEC brushless motors, to the interchangeable Centrotec and FastFix chucks, these cordless drills were designed to work the way you work.
The Festool T+3 offers greater torque than competing drills, even those with greater voltage.
Festool 564247 10.8V lithium ion T12 + 3 Cordless Drill Set Features
FastFix Chuck System: Possibly the most innovative feature of any cordless drill on the market, the Festool FastFix chuck system allows you to use any of the five Festool specialty chucks with your drill. Chucks can be swapped quickly and easily. The T+3 Set comes standard with the Centrotec, Eccentric, Right Angle and Drill chucks (shown above the drill). An optional Depth Stop chuck is also available.
Second Generation Brushless Motor: The Festool T+3 cordless drill features a second generation brushless motor. Brushless motors offer many advantages over the brushed DC motors in all other cordless drills including higher efficiency, better reliability and longer service life. These advantages allow the T+3 to out perform other drills.
Dual Motor Speed Selector: The T+3 offers two speed settings, which can be selected by the conveniently placed selector on the top of the drill. Changing the speed setting does not change the torque produced by the motor, which is electronically controlled. Use the speed selector in conjunction with the clutch setting to drill with full power or to drive delicate soft metal screws without damage.
Drill / Drive Mode Selector: Like all controls of the T+3, the drive/drill mode selector is conveniently located. When in drill mode, the drill automatically overrides the clutch to make sure you get maximum power and torque. When in drive mode, the clutch re-engages. Switch between drill and drive modes without losing your clutch setting, yet another way Festool helps you work faster, easier, smarter.
Three Year Warranty - On Everything!: When considering your next cordless drill purchase, take into consideration the total cost of ownership over the life of the tool. The Festool T+3 is the only cordless drill on the market that offers a full 3-year warranty on the drill, charger and batteries. The cost of replacement batteries can quickly increase the long term cost of a cordless drill. Festool's T+3 warranty demonstrates our confidence in providing you with the best cordless drill on the market.
Electronically Controlled Clutch: Nearly all drills employ a mechanical clutch. The T+3 uses a superior, more sophisticated electronic clutch. The conveniently placed clutch dial controls the electronic clutch setting. This results in less wear on the motor and other wearable parts. When the clutch engages, the T+3 notifies you with an audible tone. When the clutch dialed to a setting below 10, the speed of the drill is also reduced automatically.
Forward / Reverse Selector: Use the forward / reverse selector to switch motor direction. Quickly switch between driving and removing screws.
Soft, Ergonomic Grip: You probably use your cordless drill for extended periods of time. Therefore, a primary concern when designing the T+3 was making it comfortable to use. The soft, rubberized grip reduces fatigue and the drill is designed to be well balanced. The use of Lithium Ion batteries has significantly lowered the weight of the drill also enhancing comfort.
Ventilation Ports The T+3 cordless drill has strategically placed ventilation ports to reduce the chances of premature wear due to overheating. The drill also features Festool's patented MMC electronics, which monitor and protect the drill from damage and overheating.
Intelligent Lithium Ion Batteries: With some of the most sophisticated Lithium Ion technology available, the T+3 batteries are backed by a full three-year warranty. The batteries are cell balanced meaning that battery cells are selected and matched to offer optimal charge and discharge cycles. The T+3 batteries can achieve full charge in under 70 minutes.
Intelligent Battery Charger: The T+3 cordless drill comes with an intelligent microprocessor-controlled battery charger that uses pulse charging technology. The charger is designed to protect your batteries from damage and prolong their life. On-board LEDs provide instant status feedback. The charger is also compatible with Festool NiCD and NiMH batteries.
Magnetic Bit Stowage: Always have quick access to your most commonly used driver bits by stowing them on the drill. The magnetic bit stowage can accommodate up to four 1" driver bits.
Festool 564247 10.8V lithium ion T12 + 3 Cordless Drill Set Specifications
Voltage: 10.8
Weight: 3 lb 1.4 oz
Speed (low): 0 - 450 rpm
Speed (high): 0 - 1,500 rpm
Chuck cap.: 1/2"
Max Drill - steel: 9/16" (14 mm)
Max Drill - wood: 1" (25.4 mm)
Max torque - steel: 265.5 in lb
Charging time (LI): 70 minutes
Festool 564247 10.8V lithium ion T12 + 3 Cordless Drill Set Includes
Festool TRC 3 Charger
Two (2) Festool Lithium Ion Batteries
Festool FastFix Right Angle, Eccentric and ½" Drill Chucks
Festool Centrotec Starter Set
Festool Systainer SYS 2 w/ Storage Compartment
|
