|
|
|
|
|
|
Amana Tool 2 Flute Flush Trim Plunge Template With Upper Balll Bearing
|
|
|
This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. It is a versatile bit, useful for template/pattern routing of parts, joints, and internal cuts, and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amana Tool 2 Flute, Flush Trim W/Ball Bearing Guide
|
|
|
| 2 Flute |
|
Use any of the flush trimming bits below for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top.
A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amana Tool 3 Flute, Flush Trim W/Ball Bearing Guide
|
|
|
| 3 Flute |
|
Use any of the flush trimming bits below for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top.
For an extremely smooth finish, choose the three-flute configuration. It is especially good to use on laminates that tend to chip easily
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amana Tool 2 Flute, No File W/Ball Bearing Guide
|
|
|
| 2 Flute US Patent No 4,669,923 |
|
Eliminate the time-consuming hand-filing that normally follows each trimming cut on a laminate job. Our patented “No-File™” bit “breaks” the sharp edge as it trims the laminate flush.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amana Tool 2 Flute, Flush Trim (Extra Long) W/Ball Bearing Guide
|
|
|
| 2 Flute |
|
Use this bit for template or pattern work where the workpiece is unusually thick. The two-flute configuration cuts fast and produces a smooth finish. For a superior finish, use the three-flute version. Twin bearings on selected tools provide better contact with reference edge and more stability in the cut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amana Tool 3 Flute, Flush Trim (Extra Long) W/Ball Bearing Guide
|
|
|
| 2 Flute |
|
Use this bit for template or pattern work where the workpiece is unusually thick. The two-flute configuration cuts fast and produces a smooth finish. For a superior finish, use the three-flute version. Twin bearings on selected tools provide better contact with reference edge and more stability in the cut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amana Tool 2 Flute, Bevel Trim W/Ball Bearing Guide
|
|
|
| 2 Flute |
|
This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router.The solid construction reduces vibration for the smoothest cut possible with a two flute bit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amana Tool 3 Flute, Bevel Trim W/Ball Bearing Guide
|
|
|
| 3 Flute |
|
The solid construction of this carbide tipped bit reduces vibration, and its three-flute configuration produces a very smooth cut. Itended for use in a standard router
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amana Tool OTBBG-2flute, Overhang Trim Router Bits- 2 Flute With Ball Bearing Guide
|
|
|
Amana Tool OTBBG-2flute, Overhang Trim Router Bits- 2 Flute With Ball Bearing Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
Amana Tool FTVBBG-2flute, Flush Trim 'V' Groove Router Bit
|
|
|
Amana Tool FTVBBG-2flute, Flush Trim 'V' Groove Router Bit
|
|
|
|
|
|
|
|
|
|
|
|
|
Amana Tool SBTBBG-2flute, Special Bevel Trim with Ball Bearing Guide
|
|
|
Amana Tool SBTBBG-2flute, Special Bevel Trim with Ball Bearing Guide
|
|
|
|
|
|
|
