Kreg KHC-PREMIUM - 3 in. Reach Face Clamp
Kreg's line of Face Clamps helps to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood. To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpiece(opposite the pocket holes), clamp with moderate pressure and drive a screw.
Kreg's line of Face Clamps helps to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood. To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpiece(opposite the pocket holes), clamp with moderate pressure and drive a screw.
| Free Shipping | No |
|---|---|
| Features | Kreg KHC-PREMIUM - 3 Reach Face Clamp
Classic Face Clamps are designed for creating perfectly flush Kreg Joints, and they work great for lots of other shops and project tasks that require solid clamping without marring. These clamps feature large clamp pads that distribute clamping force evenly and hold pieces flush during assembly. When used in Kreg Joinery, the extra-large clamp face gets positioned on the “show” side of the joint. Clamping CapacityMaterials up to 23/4" (70mm) thick Reach 3" (76mm) For Use with Kreg Joinery, General Clamping, Kreg Jig® R3 Portable Clamp Pad Adapter |
| Brand | Kreg Tools |
| Ship In | Usually Ships in 24 to 72 Hours |
| Enable Dropship | No |
Log In