Malco A60 Adjustable Sheet Metal Scriber

SKU
MAL-A60
$16.61
Measure, mark, and scribe trim lines on sheet metal in one easy operation. Set the desired trim depth on the scriber extension and tighten the knob. The stop at the end of the scriber sleeve glides along the edge of work as a 6 x 3/8” sheet metal screw point scribes a clean, hard-line. Adjustable from 1/4” to 12-1/2” (6.4 to 318 mm) depths in 1/8″ (3.2 mm) graduations. Rotate the scriber extension and knob end to end for depths larger than 6-1/2”(165 mm). The use of a Zip-In sheet metal screw makes point replacement practical and economical. The screw point is protected when the tool is closed. Pocket size tool is constructed of rust-resistant nickel-plated steel. Knob assembly with hardened steel bolt insert will not strip out.
Measure, mark, and scribe trim lines on sheet metal in one easy operation. Set the desired trim depth on the scriber extension and tighten the knob. The stop at the end of the scriber sleeve glides along the edge of work as a 6 x 3/8” sheet metal screw point scribes a clean, hard-line. Adjustable from 1/4” to 12-1/2” (6.4 to 318 mm) depths in 1/8″ (3.2 mm) graduations. Rotate the scriber extension and knob end to end for depths larger than 6-1/2”(165 mm). The use of a Zip-In sheet metal screw makes point replacement practical and economical. The screw point is protected when the tool is closed. Pocket size tool is constructed of rust-resistant nickel-plated steel. Knob assembly with hardened steel bolt insert will not strip out.
Features

Malco A60 Adjustable Scriber features:

  • Measure, mark and scribe trim lines on sheet metal in one easy operation.
  • Set desired trim depth on scriber extension and tighten knob.
  • The stop at the end of the scriber sleeve glides along edge of work as a 6 x 3/8-in.sheet metal screw point scribes a clean, hard line.
  • Adjustable from 1/4-in.to 12-1/2-in. (6.4 to 318 mm) depths in 1/8" (3.2 mm) graduations.
  • Rotate the scriber extension and knob end to end for depths larger than 6-1/2-in.(165 mm).
  • The use of a Zip-In sheet metal screw makes point replacement practical and economical.
  • Screw point is protected when tool is closed.
  • Pocket size tool is constructed of rust resistant nickel plated steel.
  • Knob assembly with hardened steel bolt insert will not strip out.
Tech Specs
  • Minimum & Maximum Adjustments in. (mm) : 1/4" to 12-1/2" (6.4 to 318)
  • Overall Length: 12"
Brand Malco Tools
Ship In Usually Ships in 24 to 72 Hours
Enable Dropship No
Your Rating
You May Also Like