| Features |
Powermatic 1280100C Model PM2700 3HP 230V Shaper:
Power, Accuracy, and Durability
Bringing an industry-leading package of features to your shop, the PM2700 has Powermatic's legendary durability and precision. It boasts a fully welded base cabinet built from heavy-gauge steel and includes a dust collection chute that terminates in a four-inch-diameter port at the rear. There's both a door and window for easy monitoring of, and access to, the belt and spindle lock, and a micro-switch to prevent the motor from starting unless the door is securely closed.
Robust Five-Horsepower Motor
The PM2700 comes equipped with a powerful 3-horsepower, 1-phase, 230-volt motor mounted in a cast-iron mechanism that controls cutter height. This mechanism is operated by the large, 8-inch-diameter cast-iron hand wheel (with spinner) conveniently located on the front of the base cabinet. For smooth, slip-free power transmission, the motor is fitted with a two-speed pulley system that uses a Poly-V belt--a magnetic switch protects against power fluctuations. All the controls, including a quick-release lever for fast speed and belt changing, are conveniently grouped within easy reach.
For ease of movement, this sturdy, 664-pound machine has four retractable full-swivel casters (patent pending) with tough polyurethane tires that roll smoothly without leaving marks on your shop floor.
Easy Spindle Adjustments
The 3/4-inch- and 1-1/4-inch-diameter spindles are retained with a tough drawbar and locking nut, and offer speeds from 7,500 to 10,000 rpm. Height changes to within 1/1,000 of an inch--critical when aligning rail and stile cutters for raised panel doors--are simple thanks to the spinner handle on the cast-iron hand wheel. At the same time, the digital spindle-height display ensures accuracy.
Extra-Large Cast-Iron Table
To help simplify large projects, the PM2700 comes with a generously sized cast-iron flat table that stands a comfortable 35-1/2 inches (with casters retracted) from the floor for safe and easy handling of big materials. The top features a full-size, T-shape miter slot that runs the full width of the table. Also, both rear corners of the table are pre-drilled and tapped to accept Powermatic feeding systems.
Sophisticated Fence System
This shaper includes a sophisticated, safe, and accurate fence system, including several T-slots, so you can mount a wood face and create a no-clearance surface around any shaper or router bit. The design allows for quick movement of the fence close to its final position. It's then easy to lock it in and use the precision micro adjustments on each side of the cutter to dial in the exact position needed.
It also comes with two feather boards to help keep cuts consistent while improving safety.
The PM2700 is backed by a five-year warranty.
What's in the Box
One Powermatic PM2700 3-horsepower shaper, one fence assembly, one cabinet and base, two lock handles, two M13 flat washers, one miter assembly, one draw bar, one 1-1/4-inch spindle, one 3/4-inch spindle, two spindle nuts, one 3-7/8-inch insert ring, four M10 socket head cap screws, four M10 lock washers, one starting pin, one 8-millimeter hex wrench, one cross-point/flat-head screwdriver, one wrench, one warranty card, and one manual. |
Log In